Fast delivery Batch Weighing System - JJ-LIW BC500FD-Ex Dripping System – JIAJIA
Fast delivery Batch Weighing System - JJ-LIW BC500FD-Ex Dripping System – JIAJIA Detail:
Function principles
The meter controller collects the weight signals of the measuring tank in real-time
Convert the weight per unit time into an instantaneous flow
PID controller calculates the instantaneous flow rate and the preset value
According to the PID algorithm results, the meter controller outputs 4-20mA analog signals to the regulating valve/inverter to make precise flow control
At the same time, the meter controller accumulates the weight of the material flowing out of the measuring tank. When the accumulated value is equal to the set value, the meter controller closes the valve/inverter and stops the dripping.
Features
Highlight display interface, simultaneously display instantaneous flow and cumulative total
Automatic feeding function
Remote, local switching, and manual and automatic control
Comprehensive status monitoring and chain alarm function
Real-time monitoring of sensor load, convenient for maintenance and troubleshooting
Can coordinate with DCS/PLC through the data bus
Standard RS232/485 dual serial ports, MODBUS RTU communication
Extendable a 4~20mA input and a 4~20mA output Optional Profibus DP interface
Features
Case 1: Weighing flowmeter
1. The weighing method is not affected by temperature, density, installation method, etc.
2. High measurement accuracy
3. No contact with materials, no cross-infection
Case 2: Automatic control of dripping by the instrument
1. Automatic drip control of the instrument
2. Quick setting of process parameters
3. On-site operation display, simple and intuitive
Case 3: Meter metering flow, DCS control dripping
1. The weighing method is not affected by temperature, density, installation method, etc.
2. The meter directly provides flow data, and DCS controls the process
3. Fast sampling frequency and high measurement accuracy
Case 4: DCS instruction, meter automatically controls dripping
1. Automatic dripping control
2. The instrument participates in the process
3. Reduce the cost of PLC/DCS software and hardware
Specification
Enclosure |
Cast Aluminum |
Run Mode |
Constant feeding, Material level Balancing, Batch feeding |
Signal Range |
-20mV~+20mV |
Max. Sensitivity |
0.2uV/d |
FS Drift |
3ppm/°C |
Linearity |
0.0005%FS |
Flowrate Unit |
kg/h, t/h |
Dec.point |
0, 1, 2, 3 |
Control Mode |
Zone Adj. / PID Adj. |
Max Quantity |
<99,999,999t |
Display |
128×64 Yellow-Green OLED display |
Keypad |
16 Flat switch membrane with tactile-feel keys; polyester overlay |
Discrete I/O |
10 Inputs; 12 Outputs(24VDC @500mA with over-load protection) |
Analog Output |
4~20mA/0~10V |
USART |
COM1: RS232;COM2: RS485 |
Serial Protocol |
MODBUS-RTU |
Power Supply |
100~240VAC,50/60Hz, <100mA(@100VAC) |
Operating Temperature |
–10°C ~ +40°C,Relative humidity:10%~90%,non-condensing |
Product detail pictures:
Related Product Guide:
New weights and their correct classification method
Why is there an error in weight calibration?
Adhering for the theory of "quality, services, performance and growth", we have received trusts and praises from domestic and worldwide shopper for Fast delivery Batch Weighing System - JJ-LIW BC500FD-Ex Dripping System – JIAJIA , The product will supply to all over the world, such as: Japan, Lithuania, Afghanistan, With all these supports, we can serve every customer with quality product and timely shipping with highly responsibility. Being a young growing company, we might not the best, but we are trying our best to be your good partner.
By Delia Pesina from Greece - 2017.02.28 14:19
A nice supplier in this industry, after a detail and careful discussion, we reached a consensus agreement. Hope that we cooperate smoothly.
By Ruth from Bolivia - 2018.11.04 10:32